Engineering

Engineering Transfer Program

To better respond to the needs of our students and our community, Las Positas College announces its Engineering Transfer Program. This accredited and articulated program will provide lower division engineering, mathematics, and science courses to prepare students to transfer to a four year institution to pursue an engineering degree. The engineering career field is at once challenging, rewarding, and dynamic. Engineering, as a profession, is going through a period of rapid change and growth, impacting virtually every aspect of our lives. Opportunities for students in this career field are endless.

A career in engineering offers many options. Aeronautical, Mechanical, Industrial, Electrical, Optical, Computer, Biological Systems, and Chemical Engineering are just some of the many engineering specialties offered by the California State University or the University of California. The Las Positas College Career/Transfer Center or your counselor can provide you additional information. Las Positas College is now offering, on our campus, a re-energized Engineering Transfer Program delivering the engineering courses you'll need to transfer to a four year institution.

Here are the general transfer requirements for Engineering. However, to make sure that you have competed the appropriate courses for transfer to a specific college make sure to schedule an appointment with a Las Positas counselor and check how these courses transfer to any college or university in California, including UCs and CSUs.

Engineering Requirements (Transfer Preparation)

Freshman Year

Courses Units
Chemistry 1A* (General College Chemistry) 5
Engineering 10 (Introduction to Engineering) 2
Engineering 22 (Engineering Design Graphics) 3
Mathematics 1 (Analytic Geometry and Calculus I) 5
Mathematics 2 (Analytic Geometry and Calculus II) 5
Physics 8A (General Physics I) 5
Physics 8B (General Physics II) 5
Computer Science 1 (Computing Fundamentals I) 4-5


Sophomore Year

Courses Units
English 1A (Critical Reading and Composition) 3
Engineering 35 (Statics) 3
Engineering 44 (Introduction to Circuit Analysis) 4
Engineering 46 (Materials of Engineering) 3
Mathematics 3 (Multivariable Calculus) 5
Mathematics 5 (Differential Equations with Computer Applications) 3.5
Mathematics7*** (Elementary Linear Algebra with Computer Applications) 3.5
Mathematics 10*** (Discrete Mathematics) 4
Physics 8C (General Physics III) 5
Physics 8D** (General Physics IV) 3
Speech 1 (Fundamentals of Speech Communication) 3
   



*Chemical Engineering and Materials Engineering majors should also take Chemistry 1B
**Physics 8D may not be required by some universities for specific engineering majors
***Mathematics 7 and 10 may not be required by some universities for specific engineering majors.

The following list outlines the courses required for an Engineering major at Las Positas College. Although this list shows only two years, it is not uncommon for transfer students to take 3 or more years to complete the courses listed below. To make sure that you have competed the appropriate courses for transfer to a specific college make sure to schedule an appointment with a Las Positas counselor and check how these courses transfer to any college or university in California, including UCs and CSUs. Another excellent resource for transfer information is the ASSIST website, which provides specific course-to-course articulation information between any California community college and any 4-year California university.

Sample Engineering Transfer Two-Year Program

Semester 1 (Fall Semester)

Course Course Title Units Prerequisites Semesters Offered
MATH 1

Analytic Geometry & Calculus I

5 units

MATH 20 Pre-Calculus Fall, Spring & Summer

CHEM 1A

General College Chemistry I

5 units

MATH 55 Intermediate Algebra
CHEM 31 Intro and Applied Chemistry
Fall, Spring & Summer

ENGR 10

Introduction to Engineering

2 units

None Fall & Spring

ENGL 1A

Critical Reading and Composition

3 units

ENGLISH 100B or 104 Fall, Spring & Summer

Total

 

15 units

   

Semester 2 (Spring Semester)

Course Course Title Units Prerequisites Semesters Offered

MATH 2

Analytic Geometry & Calculus II

5 units

MATH 1 Analytic Geometry & Calculus I Fall & Spring

PHYS 8A

General Physics I (Mechanics)

5 units

MATH 1 Analytic Geometry & Calculus I Fall & Spring

ENGR 22

Engineering Design Graphics

3 units

None Fall & Spring

CHEM 1B*

General College Chemistry II

5 units

CHEM 1A General College Chemistry I Fall, Spring & Summer

Total

 

18 units

   

Semester 3 (Fall Semester)

NOTE: Apply to Transfer in November of this semester!

Course Course Title Units Prerequisites Semesters Offered

MATH 3

Multivariable Calculus

5 units

MATH 2 Analytic Geometry & Calculus II Fall & Spring

MATH 7**

Elementary Linear Algebra

3.5 units

MATH 2 Analytic Geometry & Calculus II Fall & Spring

PHYS 8C

General Physics III (Waves/Heat/Light)

5 units

MATH 2 Analytic Geometry & Calculus II
PHYS 8A General Physics I
Fall & Spring

ENGR 35

Statics

3 units

MATH 2 Analytic Geometry & Calculus II
PHYS 8A General Physics I
ENGR 22 Engineering Graphics
Fall only

Total

 

16.5 units

   

Semester 4 (Spring Semester)

Course Course Title Units Prerequisites Semesters Offered

MATH 5

Differential Equations

3.5 units

MATH 3 Analytic Geometry & Calculus III Fall & Spring

PHYS 8B

General Physics II Electricity/Magnetism

5 units

MATH 3 Analytic Geometry & Calculus III***
PHYS 8A General Physics I
Fall & Spring

ENGR 44

Introduction to Circuit Analysis

4 units

PHYS 8A General Physics I Spring only

ENGR 46

Materials of Engineering

3 units

CHEM 1A General College Chemistry I Spring only

SPCH 1

Fundamentals of Speech Communication

3 units

None Fall, Spring & Summer

Total

 

18.5 units

   

Other Courses that may need to be completed:

Course Course Title Units Prerequisites Semesters Offered

MATH 10**

Discrete Mathematics

4 units

MATH 1 Analytic Geometry & Calculus I Fall & Spring

PHYS 8D**

General Physics IV
(Modern Physics)

3 units

PHYS 8B General Physics II Fall & Spring

CS 1

Computing Fundamentals I

4-5 units

MATH 55 Intermediate Algebra Fall & Spring
         

Total Transferable Units

68-80 units

 

 

Notes:

*CHEM 1B is not required for most engineering majors; Chemical Engineering and Materials Engineering majors should take CHEM 1B. Check www.assist.org for information specific to a given major and a given transfer university.

**MATH 7, MATH 10 and PHYS 8D may not be required by some universities for specific engineering majors. Check www.assist.org for information specific to a given major and a given transfer university.

***MATH 3 may be taken concurrently with PHYS 8B

Other Important Notes:

  1. Do not complete all of your lower-division General Education courses. As an Engineering major, you are one of the few transfer majors who do not complete General Education courses before transferring. Note that CSU campuses (e.g., San Jose State, CSU East Bay, Cal Poly SLO) require more G.E. courses for transfer than do UC campuses (e.g., UC Davis, UC Berkeley). See an LPC counselor for more information.

  2. Take as high a Math class as possible each semester. Because Math classes are prerequisites for all Physics and Engineering classes, it is important to complete your Math sequence as efficiently as possible.

  3. Complete Chemistry early in your lower-division program, complete Physics and Engineering late in your lower-division program.

  4. Most 4-year universities will only accept 70 semester units. However, most of these universities also understand that engineering majors frequently exceed that 70 semester unit threshhold. Because of this, most transfer universities will grant course credit for required courses beyond the 70 unit threshhold (meaning you do not have to repeat the same course at the university), even when they do not grant the units.

  5. Most transfer students will spend about 3 years at the community college to complete a lower-division program. Only those students who start with Calculus I (MATH 1) during Fall Semester, Freshman year, will have a chance to complete the transfer program in 2 years time. Your goal as a transfer student is to transfer into the Junior class at a 4-year university. LPC transfer students for Fall 2009 are transferring to California universities including UC Berkeley, UC Davis, UCLA, Cal Poly San Luis Obispo, San Jose State, Sacramento State, and Chico State.

 

Engineering

Building 1800

Keith Level
Engineering Faculty
925.424.1254

Lisa Everett
Mathematics, Science, Engineering and Public Safety Dean
925.424.1182

Thomas Dodge
Science Lab Technician
925.424.1339

Print this Page Email this Page

Page last modified: January 25, 2016